Top 3 Things To Do If Your Car Starts To Overheat | Brown’s Collision

If your car starts to overheat, it’s a serious problem that needs to be addressed immediately. Otherwise, it might cost you your engine. Modern vehicles have warning lights that let you know when your engine starts overheating so you act accordingly. Another way of knowing that your vehicle might be starting to overheat is when the temperature gauge starts moving towards hot. You should not keep driving when this happens. Pull your vehicle over, turn off your engine and then call for help. A car engine is sophisticated equipment and pinpointing the source of overheating is much easier when professionals run a diagnostic test.

In the event that you have to take matters into your own hands, car tips come in handy. Even though overheating can be due to a variety of reasons, the following three things can help you save your engine from melting or warping. 

1. Wait For the Engine to Cool Down.

This is an important car tip because acting before the vehicle is completely cooled can cause an injury. Assuming that you’ve already pulled over on the side of the road, the next thing is to wait at least 30 minutes for the engine to cool off before taking any action. It might be tempting to touch the radiator cap while you wait, but you shouldn’t because the cooling is highly pressurized and popping the radiator can cause an injury. 

Consider speeding up the cooling process by popping the hood using the latch located inside the car’s interior. This should only be done once the hood is cool enough to touch so it doesn’t burn your fingers. 

2. Check the Anti-Freeze/Coolant Reservoir.

Once you’ve given your engine enough time to cool off, you can now take the next action. An excellent car tip is to check the anti-freeze reservoir because you need to determine if it’s empty or has low fluid. The coolant reservoir is usually a translucent plastic tank located near the radiator. 

If the reservoir is empty or on low fluid, you’ll need to refill it with new antifreeze. This should be done when the car has completely cooled off, and the fluid used should be the one specified by the vehicle’s manufacturer. 

3. Check the Hoses for Leaking or Blockage.

Another car tip you shouldn’t forget is to check for leakages or blockage. Your vehicle might be overheating because the coolant has been blocked from circulating in the engine or because it has leaked out. If the coolant tank is empty, chances are good that you’ve got a leak. You might even spot a puddle on the ground or drip from the coolant reservoir. 

The coolant’s purpose is to absorb heat from your engine, and if something goes wrong in the cooling system, components of the engine might warp or melt. Vehicle overheating is dangerous because your engine running at temperatures that are too high might cost you your engine. 

To sum it up

Aside from a coolant system malfunction, there are other possible causes of overheating. These include thermostat failure, leaking water pump and blocked airflow. The car tips provided ensure that you act in a reasonable amount of time before your vehicle’s engine is damaged. Always work with a professional auto repair shop like Brown’s Collision Center to ensure all precautions are taken to ensure engine overheating is avoided. Every time you’re in doubt about the next action to take, contact Brown’s Collision Center for expert advice. 

No comments yet.

Leave a Reply